MAEDA – Italthai Industrial https://italthaiindustrial.com/en/ Fri, 05 Nov 2021 06:11:52 +0000 en-US hourly 1 https://wordpress.org/?v=5.9.12 https://italthaiindustrial.com/wp-content/uploads/2022/04/cropped-ITG_v_fc_dar-32x32.png MAEDA – Italthai Industrial https://italthaiindustrial.com/en/ 32 32 MAEDA MC174C https://italthaiindustrial.com/en/product/maeda-mc174c/ https://italthaiindustrial.com/en/product/maeda-mc174c/#respond Wed, 14 Aug 2019 07:59:06 +0000 https://italthaiindustrial.com/?post_type=product&p=2336 Spider Crane Crane Capacity: 1.72 t x 1.0 mMax. working radius: 5.17 m x 0.22 tMax.lifting height (on the ground) : 5.5 mMax.lifting height (under the ground) : -7.0 m (4 falls)Slim body: 590 mm DOWNLOAD SPEC SHEET FEATURE & BENEFITS COMPACT BODY The 3 smaller models with a body width of only 590 mm ~ 750 mm […]

The post MAEDA MC174C appeared first on Italthai Industrial.

]]>

MAEDA MC174C

Spider Crane

Crane Capacity: 1.72 t x 1.0 m
Max. working radius: 5.17 m x 0.22 t
Max.lifting height (on the ground) : 5.5 m
Max.lifting height (under the ground) : -7.0 m (4 falls)
Slim body: 590 mm

DOWNLOAD SPEC SHEET

FEATURE & BENEFITS

img-maeda104c1

COMPACT BODY

The 3 smaller models with a body width of only 590 mm ~ 750 mm can travel through a standard single door for indoor use. Equipped with crawlers, travelling into confined area where bigger cranes or truck cranes cannot access is an easy job for the Maeda spider cranes.
img-maeda104c3

LIGHT WEIGHT

Compact and light weight, mini spider cranes can be lifted up to a site by larger cranes or service elevators, then often used for various construction works such as material handling and curtain wall lifting from inside buildings or on roof tops.
img-maeda104c4

OUTRIGGERS

By stabilizing the body with its four outriggers, lifts of up to 8.0 t can be carried out. Even on a site with obstacles or on steps, outriggers make stable lifting work possible.
img-maeda104c5

POWERFUL OPERATION

With up to 8.0 t capacity, MC series are used for many different applications such as construction, civil engineering and heavy load installation works.
img-maeda104c7

TIPPING PREVENTION SYSTEM

To prevent tipping accidents caused by overloading the crane, our Moment Limiter System (Safe Load Indicator) is equipped as our top safety standard. When the load reaches 90% of the rated total load, the crane starts a warning with rotary lamps and audible alarm. When the load reaches 100%, the crane will automatically stop to prevent tipping. With a digital display, the operator can continuously check working status.
img-maeda104c8

WORKING ENVELOPE SETTING

The Moment Limiter (Safe Load Indicator) can set a lifting height limit, working radius limit, and angle limit. Working range of the boom can be set as you wish, and the boom will automatically stop at the set point. This function is very useful for narrow places with obstacles or limitations such as power plants and factories.
img-maeda104c9

INTERLOCK SYSTEM

The Outrigger Interlock System restricts activation of the outriggers if the boom is not stowed and outriggers are not rotated to set position. It detects boom slew and derrick position, and outrigger rotation position. The Crane Interlock System enables the crane to work if outriggers are grounded correctly. It detects outrigger rotatory position and grounding condition.
img-maeda104c10

CRANE TILT ALARM

An alarm is issued in the event of the crane operating at over 3-degree inclination, or over 15-degree inclination when travelling.
img-maeda104c12

SEARCHER HOOK AND FLY JIB

By using the optional searcher hook, the highest reach of the crane can be achieved even in places with height limitations due to ceilings or under the roof eaves. This is very often used for glazing works. Also an optional fly jib mounted at the tip of the boom can create further lifting height.

MAEDA MC174C SPIDER-CRANE

Light and compact body. Supportive outriggers mean lifting can be carried out on any site.

Contact us

Product Specifications

Crane Capacity1.72 t x 1.0 m
Max. Working Radius5.17 m x 0.22 t
Max. Lifting Height5.5 m
Max. Reach Below Ground-7.0 m (4 falls)
Slim body590 mm
Outrigger Max. Extended Width(Lateral) 3,335 x (Front) 3,060 x (Rear) 2,885 mm
Travel Speed0-3.3km/h
Travel Ground Pressure33.7kpa [0.34 kgf/cm²]
Engine
Mitsubishi GB400LE / Petrol
Engine Rated Output
6.6 kW /1,800 rpm
Dimensions(L) 2,000 x (W) 590  x (H) 1,300 mm
Machine Weight1,290 kg

The post MAEDA MC174C appeared first on Italthai Industrial.

]]> https://italthaiindustrial.com/en/product/maeda-mc174c/feed/ 0 MAEDA MC305C-3 https://italthaiindustrial.com/en/product/maeda-mc305c-3/ https://italthaiindustrial.com/en/product/maeda-mc305c-3/#respond Thu, 04 Nov 2021 05:10:49 +0000 https://italthaiindustrial.com/?post_type=product&p=10985 Spider Crane Crane Capacity: 2.98t x 2.5mMax. working radius: 12.16m x 0.26tMax.lifting height (on the ground) : 12.52mMax.lifting height (under the ground) : -16.09m (4 falls)Slim body: 1,280mm DOWNLOAD SPEC SHEET FEATURE & BENEFITS COMPACT BODY The 3 smaller models with a body width of only 590 mm ~ 750 mm can travel through a standard […]

The post MAEDA MC305C-3 appeared first on Italthai Industrial.

]]>

MAEDA MC305C-3

Spider Crane

Crane Capacity: 2.98t x 2.5m
Max. working radius: 12.16m x 0.26t
Max.lifting height (on the ground) : 12.52m
Max.lifting height (under the ground) : -16.09m (4 falls)
Slim body: 1,280mm

DOWNLOAD SPEC SHEET

FEATURE & BENEFITS

img-maeda104c1

COMPACT BODY

The 3 smaller models with a body width of only 590 mm ~ 750 mm can travel through a standard single door for indoor use. Equipped with crawlers, travelling into confined area where bigger cranes or truck cranes cannot access is an easy job for the Maeda spider cranes.
img-maeda104c2

ELECTRIC MOTOR

The optional electric motor ensures work can be carried out cleanly indoors without any concern for gas emissions.
*For models MC285C-2 and up.
img-maeda104c3

LIGHT WEIGHT

Compact and light weight, mini spider cranes can be lifted up to a site by larger cranes or service elevators, then often used for various construction works such as material handling and curtain wall lifting from inside buildings or on roof tops.
img-maeda104c4

OUTRIGGERS

By stabilizing the body with its four outriggers, lifts of up to 8.0 t can be carried out. Even on a site with obstacles or on steps, outriggers make stable lifting work possible.
img-maeda104c5

POWERFUL OPERATION

With up to 8.0 t capacity, MC series are used for many different applications such as construction, civil engineering and heavy load installation works.
img-maeda104c6

DURABLE WINCH

Maeda’s winch uses a disk brake which is highly durable for continuous use. Operations can be carried out for a long period of time from roof tops or construction sites.
*For models MC285C-2 and up.
img-maeda104c7

TIPPING PREVENTION SYSTEM

To prevent tipping accidents caused by overloading the crane, our Moment Limiter System (Safe Load Indicator) is equipped as our top safety standard. When the load reaches 90% of the rated total load, the crane starts a warning with rotary lamps and audible alarm. When the load reaches 100%, the crane will automatically stop to prevent tipping. With a digital display, the operator can continuously check working status.
img-maeda104c8

WORKING ENVELOPE SETTING

The Moment Limiter (Safe Load Indicator) can set a lifting height limit, working radius limit, and angle limit. Working range of the boom can be set as you wish, and the boom will automatically stop at the set point. This function is very useful for narrow places with obstacles or limitations such as power plants and factories.
img-maeda104c9

INTERLOCK SYSTEM

The Outrigger Interlock System restricts activation of the outriggers if the boom is not stowed and outriggers are not rotated to set position. It detects boom slew and derrick position, and outrigger rotation position. The Crane Interlock System enables the crane to work if outriggers are grounded correctly. It detects outrigger rotatory position and grounding condition.
img-maeda104c10

CRANE TILT ALARM

An alarm is issued in the event of the crane operating at over 3-degree inclination, or over 15-degree inclination when travelling.
img-maeda104c11

REMOTE CONTROL

Accurate positioning of the load is possible with a single crane operative using the Remote Control.The Remote Control is equipped with a micro-speed mode for precision work. There is also a function that allows the user to set speed. The operator can confirm actual load and RTL (rated total load) using the LCD monitor during operation.
img-maeda104c12

SEARCHER HOOK AND FLY JIB

By using the optional searcher hook, the highest reach of the crane can be achieved even in places with height limitations due to ceilings or under the roof eaves. This is very often used for glazing works. Also an optional fly jib mounted at the tip of the boom can create further lifting height.

MAEDA MC305C-3 SPIDER-CRANE

Light and compact body. Supportive outriggers mean lifting can be carried out on any site. A range of optional equipment that enables our cranes to adapt
to all kinds of work and environmental factors.

Contact us

Product Specifications

Crane Capacity2.98t x 2.5m
Max. Working Radius12.16m x 0.26t
Max. Lifting Height12.52m
Max. Reach Below Ground-16.09m (4 falls)
Outrigger Max. Extended Width(Lateral) 4,888 x (Front) 4,504 x (Rear) 4,396 mm
Travel Speed0-2.8km/hr
Travel Ground Pressure37.3kpa (0.38 kgf/cm2)
Electric Motor5.5kw, 4P 380V
EngineYANMAR 3TNV76 / Diesel
Dimensions(L) 4,285 x (W) 1,280 x (H) 1,695 mm
Machine Weight3,900kg (4,080kg with electric motor)

The post MAEDA MC305C-3 appeared first on Italthai Industrial.

]]> https://italthaiindustrial.com/en/product/maeda-mc305c-3/feed/ 0 MAEDA MC285C-3 https://italthaiindustrial.com/en/product/volvo-mc285c-3/ https://italthaiindustrial.com/en/product/volvo-mc285c-3/#respond Tue, 23 Jun 2020 10:33:13 +0000 https://italthaiindustrial.com/?post_type=product&p=9929 Spider Crane Crane Capacity: 2.82 t x 1.4 mMax.working radius: 8.205 m x 0.15 tMax.lifting height (on the ground): 8.7 mMax.lifting height (under the ground): -10.1 m (4 falls)Slim body: 750 mm DOWNLOAD SPEC SHEET FEATURE & BENEFITS COMPACT BODY The 3 smaller models with a body width of only 590 – 750 mm can […]

The post MAEDA MC285C-3 appeared first on Italthai Industrial.

]]>

MAEDA MC285C-3

Spider Crane

Crane Capacity: 2.82 t x 1.4 m
Max.working radius: 8.205 m x 0.15 t
Max.lifting height (on the ground): 8.7 m
Max.lifting height (under the ground): -10.1 m (4 falls)
Slim body: 750 mm

DOWNLOAD SPEC SHEET

FEATURE & BENEFITS

img-maeda104c1

COMPACT BODY

The 3 smaller models with a body width of only 590 – 750 mm can travel through a standard single door for indoor use. Equipped with crawlers, travelling into confined area where bigger cranes or truck cranes cannot access is an easy job for the Maeda spider cranes.
img-maeda104c2

ELECTRIC MOTOR

The optional electric motor ensures work can be carried out cleanly indoors without any concern for gas emissions.
*For models MC285C-2 and up
img-maeda104c3

LIGHT WEIGHT

Compact and light weight, mini spider cranes can be lifted up to a site by larger cranes or service elevators, then often used for various construction works such as material handling and curtain wall lifting from inside buildings or on roof tops.
img-maeda104c4

OUTRIGGERS

By stabilizing the body with its four outriggers, lifts of up to 8 t can be carried out. Even on a site with obstacles or on steps, outriggers make stable lifting work possible.
img-maeda104c5

POWERFUL OPERATION

With up to 8 t capacity, MC series are used for many different applications such as construction, civil engineering and heavy load installation works.
img-maeda104c6

DURABLE WINCH

Maeda’s winch uses a disk brake which is highly durable for continuous use. Operations can be carried out for a long period of time from roof tops or construction sites.
*For models MC285C-2 and up
img-maeda104c7

TIPPING PREVENTION SYSTEM

To prevent tipping accidents caused by overloading the crane, our Moment Limiter System (Safe Load Indicator) is equipped as our top safety standard. When the load reaches 90% of the rated total load, the crane starts a warning with rotary lamps and audible alarm. When the load reaches 100%, the crane will automatically stop to prevent tipping. With a digital display, the operator can continuously check working status.
img-maeda104c8

WORKING ENVELOPE SETTING

The Moment Limiter (Safe Load Indicator) can set a lifting height limit, working radius limit, and angle limit.
Working range of the boom can be set as you wish, and the boom will automatically stop at the set point. This function is very useful for narrow places with obstacles or limitations such as power plants and factories.
img-maeda104c9

INTERLOCK SYSTEM

The Outrigger Interlock System restricts activation of the outriggers if the boom is not stowed and outriggers are not rotated to set position. It detects boom slew and derrick position, and outrigger rotation position. The Crane Interlock System enables the crane to work if outriggers are grounded correctly. It detects outrigger rotatory position and grounding condition.
img-maeda104c10

CRANE TILT ALARM

An alarm is issued in the event of the crane operating at over 3-degree inclination or over 15-degree inclination when travelling.
img-maeda104c11

REMOTE CONTROL

Accurate positioning of the load is possible with a single crane operative using the Remote Control.The Remote Control is equipped with a micro-speed mode for precision work. There is also a function that allows the user to set speed. The operator can confirm actual load and RTL (rated total load) using the LCD monitor during operation.
*For models MC285C-2 and up
img-maeda104c12

SEARCHER HOOK AND FLY JIB

By using the optional searcher hook, the highest reach of the crane can be achieved even in places with height limitations due to ceilings or under the roof eaves. This is very often used for glazing works. Also an optional fly jib mounted at the tip of the boom can create further lifting height.

MC285C-3 EVEN MORE VERSATILE

MC285C-3 Spider Cranes are the perfect machines for curtain wall installation, glass installation and plant equipment installation works. Mini cranes are fast becoming the machine of choice for building and repair of factories across the globe. For indoor work, Maeda Cranes are becoming more and more popular as the electric motor allows work to be completed without gas emissions in confined areas.

ติดต่อเรา

Product Specifications

Crane Capacity 2.82 t x 1.4 m
Max. Working Radius 8.205 m x 0.15 t
Max.Lifting Height 8.7 m
Max. Reach Below Ground -10.1 m (4 falls)
Max. Reach Below Ground (Aux Winch) -100m (single fall)
Outrigger Max.Extended Width (Lateral) 4,782 x (Front) 4,718 (Rear) x 3,990 mm
Travel Speed 0-2.2 km/h
Travel Ground Pressure MC285CWM-3 50 kpa (0.510 kgf/cm2)
Travel Ground Pressure MC285CWME-3 54.3kpa (0.554 kgf/cm2)
Engine YANMAR 2TNV70-NMBA / Diesel
Engine Rated Output 7.4 kW / 2,500 rpm
Engine *MC285CGRM-2 Briggs & Stratton 3564 / Petrol
Engine Rated Output *MC285CGRM-2 10.8 kW / 2,600 rpm
Electric Motor 5.5 kW, 4P 380V
Dimensions MC285CWM-3 (L)x(W)x(H) 2,800 x 750 x 1,470 mm
Dimensions MC285CWME-3 (L)x(W)x(H) 3,285 x 750 x 1,470 mm
Machine Weight MC285CWM-3 1,990 kg

The post MAEDA MC285C-3 appeared first on Italthai Industrial.

]]> https://italthaiindustrial.com/en/product/volvo-mc285c-3/feed/ 0 MAEDA MK1033CW-1 https://italthaiindustrial.com/en/product/maeda-mk1033cw-1/ https://italthaiindustrial.com/en/product/maeda-mk1033cw-1/#respond Wed, 14 Aug 2019 08:33:16 +0000 https://italthaiindustrial.com/?post_type=product&p=2375 Knuckle Boom Crane Crane Capacity: 0.995 t x 1.3 mMax. working radius: 9.9 m x 0.18 tMax.lifting height (on the ground): 11.3 mMax.lifting height (under the ground): -66.5 m (Single falls)Slim body: 750 mm DOWNLOAD SPEC SHEET FEATURE & BENEFITS COMPACT BODY The 3 smaller models with a body width of only 590 – 750 […]

The post MAEDA MK1033CW-1 appeared first on Italthai Industrial.

]]>

MAEDA MK1033CW-1

Knuckle Boom Crane

Crane Capacity: 0.995 t x 1.3 m
Max. working radius: 9.9 m x 0.18 t
Max.lifting height (on the ground): 11.3 m
Max.lifting height (under the ground): -66.5 m (Single falls)
Slim body: 750 mm

DOWNLOAD SPEC SHEET

FEATURE & BENEFITS

img-maeda104c1

COMPACT BODY

The 3 smaller models with a body width of only 590 – 750 mm can travel through a standard single door for indoor use. Equipped with crawlers, travelling into confined area where bigger cranes or truck cranes cannot access is an easy job for the Maeda spider cranes.
img-maeda104c2

ELECTRIC MOTOR

The optional electric motor ensures work can be carried out cleanly indoors without any concern for gas emissions.
*For models MC285C-2 and up
img-maeda104c3

LIGHT WEIGHT

Compact and light weight, mini spider cranes can be lifted up to a site by larger cranes or service elevators, then often used for various construction works such as material handling and curtain wall lifting from inside buildings or on roof tops.
img-maeda104c4

OUTRIGGERS

By stabilizing the body with its four outriggers, lifts of up to 8 t can be carried out. Even on a site with obstacles or on steps, outriggers make stable lifting work possible.
img-maeda104c5

POWERFUL OPERATION

With up to 8 t capacity, MC series are used for many different applications such as construction, civil engineering and heavy load installation works.
img-maeda104c6

DURABLE WINCH

Maeda’s winch uses a disk brake which is highly durable for continuous use. Operations can be carried out for a long period of time from roof tops or construction sites.
*For models MC285C-2 and up
img-maeda104c7

TIPPING PREVENTION SYSTEM

To prevent tipping accidents caused by overloading the crane, our Moment Limiter System (Safe Load Indicator) is equipped as our top safety standard. When the load reaches 90% of the rated total load, the crane starts a warning with rotary lamps and audible alarm. When the load reaches 100%, the crane will automatically stop to prevent tipping. With a digital display, the operator can continuously check working status.
img-maeda104c8

WORKING ENVELOPE SETTING

The Moment Limiter (Safe Load Indicator) can set a lifting height limit, working radius limit, and angle limit.
Working range of the boom can be set as you wish, and the boom will automatically stop at the set point. This function is very useful for narrow places with obstacles or limitations such as power plants and factories.
img-maeda104c9

INTERLOCK SYSTEM

The Outrigger Interlock System restricts activation of the outriggers if the boom is not stowed and outriggers are not rotated to set position. It detects boom slew and derrick position, and outrigger rotation position. The Crane Interlock System enables the crane to work if outriggers are grounded correctly. It detects outrigger rotatory position and grounding condition.
img-maeda104c10

CRANE TILT ALARM

An alarm is issued in the event of the crane operating at over 3-degree inclination or over 15-degree inclination when travelling.
img-maeda104c11

REMOTE CONTROL

Accurate positioning of the load is possible with a single crane operative using the Remote Control.The Remote Control is equipped with a micro-speed mode for precision work. There is also a function that allows the user to set speed. The operator can confirm actual load and RTL (rated total load) using the LCD monitor during operation.
*For models MC285C-2 and up
img-maeda104c12

SEARCHER HOOK AND FLY JIB

By using the optional searcher hook, the highest reach of the crane can be achieved even in places with height limitations due to ceilings or under the roof eaves. This is very often used for glazing works. Also an optional fly jib mounted at the tip of the boom can create further lifting height.

MAEDA MK1033CW-1 KNUCKLE BOOM CRANE​

Unique Knuckleboom type crane. Based on the MC series but with the advantage of a hydraulic luffing jib to provide lifting duties over obstacles.

ติดต่อเรา

Product Specifications

Crane Capacity0.995 t x 1.3 m
Max. Working Radius9.9 m x 0.18 t
Max.lifting height (on the ground)11.3 m
Max.lifting height (under the ground)-66.5m (Single fall)
Max. Reach Below Ground (Aux Winch)-100m (single fall)
Max. Reach Below Ground (Optional Winch)(Lateral) 4,580 x (Front) 4,530 x (Rear) 3,810 mm
Travel Speed0-2.0km/h
Travel Ground Pressure (MK1033CW-1)57.6 kpa (0.59kgf/cm2)
Travel Ground Pressure (MK1033CWEH-1)59.6 kpa (0.61kgf/cm2)
EngineYANMAR 2TNV70-NMBA / Diesel
Engine Rated Output7.4 kW / 2,500 rpm
Electric Motor5.5 kW, 4 P 380 V
Dimensions (MK1033CW-1)(L) 2,900 x (W) 750 x (H) 1,955 mm
Dimensions (MK1033CWH-1)(L) 3,030 x (W) 750 x (H) 1,990 (1,955)* mm
Dimensions (MK1033CWE-1)(L) 2,900 x (W) 750 x (H) 1,955 mm
Dimensions (MK1033CWEH-1)(L) 3,235 x (W) 750 x (H) 1,990 (1,955)* mm
Machine Weight (MK1033CW-1)2,290 kg (2,000 kg)*
Machine Weight (MK1033CWH-1)2,390 kg
Machine Weight (MK1033CWE-1)2,270 kg
Machine Weight (MK1033CWEH-1)2,370 kg

The post MAEDA MK1033CW-1 appeared first on Italthai Industrial.

]]> https://italthaiindustrial.com/en/product/maeda-mk1033cw-1/feed/ 0 MAEDA CC432S-1 https://italthaiindustrial.com/en/product/maeda-cc432s-1/ https://italthaiindustrial.com/en/product/maeda-cc432s-1/#respond Mon, 22 Jun 2020 06:41:27 +0000 https://italthaiindustrial.com/?post_type=product&p=9827 Crawler crane Crane Capacity: 2.93 t x 1.5 mMax. Working Radius: 8.38 m x 0.20 tMax. Lifting Height: 9.46 mMax. Reach Below Ground: -15.5 m (4 falls)Pick & Carry Capacity: 1,465 kg DOWNLOAD SPEC SHEET FEATURE & BENEFITS Compact Body This series of telescopic cranes with compact bodies can travel into places with even the […]

The post MAEDA CC432S-1 appeared first on Italthai Industrial.

]]>

MAEDA CC432S-1

Crawler crane

Crane Capacity: 2.93 t x 1.5 m
Max. Working Radius: 8.38 m x 0.20 t
Max. Lifting Height: 9.46 m
Max. Reach Below Ground: -15.5 m (4 falls)
Pick & Carry Capacity: 1,465 kg

DOWNLOAD SPEC SHEET

FEATURE & BENEFITS

Maeda-CC423S-1_Feature1

Compact Body

This series of telescopic cranes with compact bodies can travel into places with even the most difficult and restricted access. There is no need to set outriggers, and 360 degree continuous slewing is available with near-zero tail swing, so slewing work can easily be carried out in confined spaces. Underground construction is one of the most popular applications. With 2.9t~6t capacity in the line-up, powerful and stable lifting work can be achieved.
Maeda-CC423S-1_Feature2

Pick and Carry

The pick and carry function (maximum 2.93t capacity), enables lifting and travelling loads over distances to make work more efficient.
Maeda-CC423S-1_Feature3

Tipping Prevention System

To prevent tipping accidents caused by overloading the crane, our Moment Limiter System is equipped as our top safety standard. When the load reaches 90% of the rated total load, the crane starts a warning with rotary lamps and audible alarm. When the load reaches 100%, the crane will automatically stop to prevent tipping. With a digital display, the operator can continuously check working status.
Maeda-CC423S-1_Feature4

Working Envelope Setting

The Moment Limiter (Safe Load Indicator) can set a lifting height limit, working radius limit, and angle limit. Working range of the boom can be set as you wish, and the boom will automatically stop at the set point. This function is very useful for narrow places with obstacles or limitations such as power plants and factories.
Maeda-CC423S-1_Feature5

Crane Tilt Alarm

An alarm is issued in the event over 15-degree inclination when travelling.
Maeda-CC423S-1_Feature7

Rear-View Camera

The rear-view camera helps the operator to see behind the machine easily.
*Not for LC383M-5
Maeda-CC423S-1_Feature9

Searcher Hook and Fly Jib

By using the optional searcher hook, the highest reach of the crane can be achieved even in places with height limitations due to ceilings or under the roof eaves. This is very often used for glazing works.
Also an optional fly jib mounted at the tip of the boom can create further lifting height.
*Not available for some models

THE NEWEST ADDITION TO THE CRAWLER CRANE

The CC423S-1 is the newest addition to the Crawler Crane range with a 2.93 t capacity. The CC423-1 has primarily been developed for use in areas such as city centres where space is restricted, due to the highly compact tracked footprint with no need for outriggers and near zero-tailswing. The major feature of this crane is the 1,465 kg Pick & Carry capacity.

Contact us

Product Specifications

Crane Capacity2.93 t x 1.5 m
Max. Working Radius8.38 m x 0.20 t
Max. Lifting Height9.46 m
Max. Reach Below Ground-15.5 m (4 falls)
Pick & Carry Capacity1,465 kg
Travel Speed0-4.6 km/h
Travel Ground Pressure43.5 kpa [0.44 kgf/cm2]
EngineYANMAR 3TNV88F-EPMBA / Diesel
Engine Rated Output17.5 kW/2,400 rpm
Dimensions4,020 x 1,740 x 2,495 mm (LxWxH)
Tail Swing980 mm
Machine Weight4,400 kg (Rubber Pads: +90 kg)

The post MAEDA CC432S-1 appeared first on Italthai Industrial.

]]> https://italthaiindustrial.com/en/product/maeda-cc432s-1/feed/ 0 MAEDA MC104C https://italthaiindustrial.com/en/product/maeda-mc140c/ https://italthaiindustrial.com/en/product/maeda-mc140c/#respond Wed, 14 Aug 2019 08:09:58 +0000 https://italthaiindustrial.com/?post_type=product&p=2351 Spider Crane Crane Capacity: 0.995 t x 1.1 mMax. working radius: 5.1 m x 0.2 tMax.lifting height (on the ground) : 5.5 mMax.lifting height (under the ground) : -7.8 m (4 falls)Slim body: 600 mm DOWNLOAD SPEC SHEET FEATURE & BENEFITS COMPACT BODY The 3 smaller models with a body width of only 590 mm ~ […]

The post MAEDA MC104C appeared first on Italthai Industrial.

]]>

MAEDA MC104C

Spider Crane

Crane Capacity: 0.995 t x 1.1 m
Max. working radius: 5.1 m x 0.2 t
Max.lifting height (on the ground) : 5.5 m
Max.lifting height (under the ground) : -7.8 m (4 falls)
Slim body: 600 mm

DOWNLOAD SPEC SHEET

FEATURE & BENEFITS

img-maeda104c1

COMPACT BODY

The 3 smaller models with a body width of only 590 mm ~ 750 mm can travel through a standard single door for indoor use. Equipped with crawlers, travelling into confined area where bigger cranes or truck cranes cannot access is an easy job for the Maeda spider cranes.
img-maeda104c2

ELECTRIC MOTOR

The optional electric motor ensures work can be carried out cleanly indoors without any concern for gas emissions.
*For models MC285C-2 and up.
img-maeda104c3

LIGHT WEIGHT

Compact and light weight, mini spider cranes can be lifted up to a site by larger cranes or service elevators, then often used for various construction works such as material handling and curtain wall lifting from inside buildings or on roof tops.
img-maeda104c4

OUTRIGGERS

By stabilizing the body with its four outriggers, lifts of up to 8.0 t can be carried out. Even on a site with obstacles or on steps, outriggers make stable lifting work possible.
img-maeda104c5

POWERFUL OPERATION

With up to 8.0 t capacity, MC series are used for many different applications such as construction, civil engineering and heavy load installation works.
img-maeda104c6

DURABLE WINCH

Maeda’s winch uses a disk brake which is highly durable for continuous use. Operations can be carried out for a long period of time from roof tops or construction sites.
*For models MC285C-2 and up.
img-maeda104c7

TIPPING PREVENTION SYSTEM

To prevent tipping accidents caused by overloading the crane, our Moment Limiter System (Safe Load Indicator) is equipped as our top safety standard. When the load reaches 90% of the rated total load, the crane starts a warning with rotary lamps and audible alarm. When the load reaches 100%, the crane will automatically stop to prevent tipping. With a digital display, the operator can continuously check working status.
img-maeda104c8

WORKING ENVELOPE SETTING

The Moment Limiter (Safe Load Indicator) can set a lifting height limit, working radius limit, and angle limit. Working range of the boom can be set as you wish, and the boom will automatically stop at the set point. This function is very useful for narrow places with obstacles or limitations such as power plants and factories.
img-maeda104c9

INTERLOCK SYSTEM

The Outrigger Interlock System restricts activation of the outriggers if the boom is not stowed and outriggers are not rotated to set position. It detects boom slew and derrick position, and outrigger rotation position. The Crane Interlock System enables the crane to work if outriggers are grounded correctly. It detects outrigger rotatory position and grounding condition.
img-maeda104c10

CRANE TILT ALARM

An alarm is issued in the event of the crane operating at over 3-degree inclination, or over 15-degree inclination when travelling.
img-maeda104c11

REMOTE CONTROL

Accurate positioning of the load is possible with a single crane operative using the Remote Control.The Remote Control is equipped with a micro-speed mode for precision work. There is also a function that allows the user to set speed. The operator can confirm actual load and RTL (rated total load) using the LCD monitor during operation.
img-maeda104c12

SEARCHER HOOK AND FLY JIB

By using the optional searcher hook, the highest reach of the crane can be achieved even in places with height limitations due to ceilings or under the roof eaves. This is very often used for glazing works. Also an optional fly jib mounted at the tip of the boom can create further lifting height.

MAEDA MC104C SPIDER-CRANE

Light and compact body. Supportive outriggers mean lifting can be carried out on any site.

Contact us

Product Specifications

Crane Capacity0.995 t x 1.1 m
Max. Working Radius5.1 m x 0.20 t
Max. Lifting Height5.5 m
Max. Reach Below Ground-7.8 m (4 falls)
Outrigger Max. Extended Width(Lateral) 3,400 x (Front) 3,300 x (Rear) 2,785 mm
Travel Speed0-1.9 km/h
Travel Ground Pressure28.4 kpa [0.29 kgf/cm²]
Electric Motor5.5 kW, 4 P 380 V
Dimensions(L) 2,160 x (W) 600 x (H) 1,305 mm 
Machine Weight1,150 kg

The post MAEDA MC104C appeared first on Italthai Industrial.

]]> https://italthaiindustrial.com/en/product/maeda-mc140c/feed/ 0 MAEDA CC1485S-1 https://italthaiindustrial.com/en/product/maeda-cc1485s-1/ https://italthaiindustrial.com/en/product/maeda-cc1485s-1/#respond Wed, 14 Aug 2019 08:20:42 +0000 https://italthaiindustrial.com/?post_type=product&p=2358 Crawler crane Crane Capacity : 6.0t x 2.6mMax. working radius : 16.1mx0.43tMax.lifting height (on the ground) : 16.7m ,22m with fly jibMax.lifting height (under the ground) : ‘-24.5 m (4 falls)Pick & Carry Capacity : 2,000 kg DOWNLOAD SPEC SHEET FEATURE & BENEFITS COMPACT BODY This series of telescopic cranes with compact bodies can travel […]

The post MAEDA CC1485S-1 appeared first on Italthai Industrial.

]]>

MAEDA CC1485S-1

Crawler crane

Crane Capacity : 6.0t x 2.6m
Max. working radius : 16.1mx0.43t
Max.lifting height (on the ground) : 16.7m ,22m with fly jib
Max.lifting height (under the ground) : ‘-24.5 m (4 falls)
Pick & Carry Capacity : 2,000 kg

DOWNLOAD SPEC SHEET

FEATURE & BENEFITS

MAEDA CC1485S-8

COMPACT BODY

This series of telescopic cranes with compact bodies can travel into places with even the most difficult and restricted access. There is no need to set outriggers, and 360 degree continuous slewing is available with near-zero tail swing, so slewing work can easily be carried out in confined spaces. Underground construction is one of the most popular applications. With 2.9t~6t capacity in the line-up, powerful and stable lifting work can be achieved.
[web]CC1485-S_pickandcarry

PICK AND CARRY

The pick and carry function (maximum 2t capacity), enables lifting and travelling loads over distances to make work more efficient.
[web]CC1485-S_PreventionSystem

TIPPING PREVENTION SYSTEM

To prevent tipping accidents caused by overloading the crane, our Moment Limiter System is equipped as our top safety standard. When the load reaches 90% of the rated total load, the crane starts a warning with rotary lamps and audible alarm. When the load reaches 100%, the crane will automatically stop to prevent tipping. With a digital display, the operator can continuously check working status.
[web]CC1485-S_WorkingEnvelopeSetting

WORKING ENVELOPE SETTING

The Moment Limiter (Safe Load Indicator) can set a lifting height limit, working radius limit, and angle limit. Working range of the boom can be set as you wish, and the boom will automatically stop at the set point. This function is very useful for narrow places with obstacles or limitations such as power plants and factories.
[web]CC1485-S_CraneTiltAlarm

CRANE TILT ALARM

An alarm is issued in the event over 15-degree inclination when travelling.
[web]CC1485-S_Rear-ViewCamera

REAR-VIEW CAMERA

The rear-view camera helps the operator to see behind the machine easily.
[web]CC1485-S_LinkSlideDoor

LINK SLIDE DOOR

The link slide door has been designed for smooth operation and eliminates problems such as mud and sand gathering in the rail groove.
[web]CC1485-S_SearcherHookandFlyJib

SEARCHER HOOK AND FLY JIB

By using the optional searcher hook, the highest reach of the crane can be achieved even in places with height limitations due to ceilings or under the roof eaves. This is very often used for glazing works. Also an optional fly jib mounted at the tip of the boom can create further lifting height.

MAEDA CC1485S-1 CRAWLER CRANE

Compact working footprint and near-zero tailswing enables lifting even in confined spaces. Pick and Carry capacities further improve job efficiency.

Contact us

Product Specifications

Crane Capacity 6.0t x 2.6m
Max. Working Radius 16.1m
Max. Lifting Height 16.7m (22.0m with fly jib)
Max. Reach Below Ground -24.6m (4 falls)
Pick & Carry Capacity 2,000kg
Travel Speed 0-3.2km/h
Travel Ground Pressure 49.0kpa [0.50kgf/cm2]
Travel Ground Pressure (with fly jib) 50.0kpa [0.51kgf/cm2]
Engine ISUZU 4LE2XDPC / Diesel
Engine Rated Output 40.3kW/2,000rpm
Dimensions 6,560mm (L) x 2,490mm (W) x 2,865mm (H)
Tail swing 1,550mm
Machine Weight 14,400kg (14,700kg with fly jib)

The post MAEDA CC1485S-1 appeared first on Italthai Industrial.

]]> https://italthaiindustrial.com/en/product/maeda-cc1485s-1/feed/ 0